- Long-proven standard industrial helmet
- Good impact absorption through HDPE technology
- With adjustable side vent as standard
- Genuine leather sweatband and padding strips
- Full range of accessories
- Large protection area through helmet shape with pulled-down nape section
- High wearing comfort and secure fit through ergonomically formed, height-adjustable suspension
- Installation work
- Cold industries
DIN EN 397, European standard for industrial safety helmets
- -20, Safety characteristics at low temperature x
- -30, Safety characteristics at low temperature o
- 440 Vac, Electrical safety characteristics o
The BER 80 can be combined with the following suspensions:
|I/79 G4,5||6-point webbing||x||-||x||x||Lieferumfang/Serie|
|I/79 G-R4,5||6-point webbing||x||-||x||x||Lieferumfang/Serie|
AS = version for eye protection available, SP = special padding strips, P = padding strips, SB = sweatband
4 Suspension may not be available with all helmet sizes and helmet colours
5 For jobs with high heat exposure (in relation to the surrounding atmosphere)
- Accessory slot 16 mm x
- Integrated eye protector c
- With adjustable side vent as standard x
- Without side vent if required c
- Rain gutter x
- Hole in helmet peak c
- Sweatband natural leather x
- Lamp holder c
- Cable loop c
- Chinstrap holder x
- All-round reflective foil c
Thermoplastic HDPE, high-density polyethylene, Helmet shape with pulled-down nape section and rain gutter
- Thermoplastic material, available in pellet form, is heated into a plastic state and turned into the required helmet shell shape using an injection moulding tool.
- Material ageing through exposure to UV radiation and other environmental influences cannot be excluded.
- The German Accident Prevention & Insurance Associations generally recommend that helmets made of thermoplastic material (HDPE and ABS) should be used for no more than 4 years.
Items supplied/as standard: Lieferumfang/Serie
Partially as standard: Teilweise Serie
Optionally available: Optional erhältlich
This picture shows a colour sample.
Do you want a special paint or to brand you helmets with your company logo? We will be pleased to offer you customized helmets: just ask us about it!
1 Applies to standard suspensions I/79 G, I/79 GD, I/79-4G, I/79 GY, I/91 G