SF2
PRO

The new superlative in automobile racing

The new SCHUBERTH helmet for four-wheel racing sets the new benchmark with a weight of only 1,150 grams. One of the lightest racing helmets in the world with even better fit and ventilation.

A pro in every detail.

Schuberth Logo Schuberth Logo
Schuberth Logo

FIA approved

The new SF2 PRO from the traditional German manufacturer not only appeals to full professionals in the world's top motorsport racing series, but also expressly to semi-professionals and ambitious amateurs in the various motorsport disciplines.

Certified to FIA Standard 8860-2010 and Snell SA/2015, the SF2 PRO meets the highest current standards.

Schuberth Logo Schuberth Logo
Schuberth Logo

The best for the best.

Formula 1 drivers Nico Hülkenberg, Sergio Pérez and Carlos Sainz Jr., like many other drivers from the various racing series, trust the SF2 PRO already.

Schuberth Logo Schuberth Logo
Schuberth Logo

The helmet

Extremely hard helmet shell made of full carbon with aramid reinforcements to aeronautic specifications. The shell made of carbon composite materials offers even fewer points of attack for the air stream.

Due to numerous interior options, the new SCHUBERTH SF2 PRO can be configured for different racing event requirements.

SF2 PRO: a pro in every detail.

Schuberth Logo Schuberth Logo
Schuberth Logo

The weight

In top-class motorsport, each hundredth of a second makes a difference – and each gram in weight. The new SF2 PRO puts even less strain on the neck musculature through consistent lightweight design than the already lightweight SF1.

During the development of the new SF2 PRO, SCHUBERTH implemented its decades of Formula 1 experience. Ready to race, the helmet weighs 1,150 grams and is therefore up to 150 grams less than the weight of the SF1.

Schuberth Logo Schuberth Logo
Schuberth Logo

The ventilation

12 air inlets and 6 air outlets provide optimum circulation. The result: 14 litres of fresh air per second at 100 km/h.

The air flow in the helmet was improved by the additional air inlets, keeping you cool in all situations.

The best for the best.

Schuberth Logo Schuberth Logo
Schuberth Logo

The aerodynamics

The interior and exterior design of the helmet shell was developed in intensive wind tunnel test series for ideal aerodynamics. Result: The SF2 PRO does not produce any lift and demonstrates an even aerodynamic balance thanks to meticulous precision work.

Each SF2 PRO can be adapted to individual needs with various spoilers and ventilation hoods.

  • Ideal aerodynamics Ideal aerodynamics
  • Chin spoiler carbon Chin spoiler carbon
  • Top spoiler carbon Top spoiler carbon
  • Chin spoiler clear Chin spoiler clear
  • Top spoiler clear Top spoiler clear
Schuberth Logo Schuberth Logo

The visor

The three-millimetre-thick polycarbonate visor is bulletproof according to the demanding FIA helmet standard. Due to the dual lens system, the visor remains completely fog-free.

The two-step one-way lock is positioned centrally – thus, the visor always locks symmetrically and therefore securely. In addition to the clear visor, 8 different combinations of mirroring and tints are available.

Schuberth Logo Schuberth Logo
Schuberth Logo

Interior fitting

The inside shell was completely redesigned. Narrower cheek pads make it easier to put on, are exchangeable and can be individually adjusted to different head shapes.

The cable ducts in the cheek pads were optimised for easier accommodation of the radio communication. SCHUBERTH uses fire-retardant Nomex® in various colours for the inner lining; the chin strap with the double-D fastener, which is mandatory in racing, also consists of fire-retardant Kevlar®.

Schuberth Logo Schuberth Logo
Schuberth Logo

Optimally equipped. Optionally available

Accessories

Schuberth Logo Schuberth Logo
Schuberth Logo

Customisable

Due to numerous interior options, the new SCHUBERTH SF2 PRO can be configured for the different requirements of Formula, GT and touring car racing.

  • Carbon Carbon
  • Transparent Transparent
Schuberth Logo Schuberth Logo

Visors

There are 8 different visor tints available, with and without mirroring.

  • light smoked light smoked
  • dark smoked dark smoked
  • light smoked red light smoked red
  • dark smoked red dark smoked red
  • light smoked blue light smoked blue
  • dark smoked blue dark smoked blue
  • light smoked silver light smoked silver
  • dark smoked silver dark smoked silver
  • clear rain visor clear rain visor
Schuberth Logo Schuberth Logo

Air inlets and outlets

  • NASCAR air scoop NASCAR air scoop
  • NASCAR air scoop NASCAR air scoop
  • Air scoop SF1 flat Air scoop SF1 flat
  • Air scoop SF1 flat Air scoop SF1 flat
  • Air scoop SF1 Standard Air scoop SF1 Standard
  • Air scoop SF1 Standard Air scoop SF1 Standard
  • Aeration and ventilation hoods Aeration and ventilation hoods
  • Chin ventilation hoods Chin ventilation hoods
Schuberth Logo Schuberth Logo

Cheek padding

Customisable cheek padding for maximum wearing comfort:

  • Padding black Padding black
  • Padding green Padding green
  • Padding blue Padding blue
  • Padding red Padding red
Schuberth Logo Schuberth Logo

Other accessories

  • HANS Clips blue HANS Clips blue
  • HANS Clips black HANS Clips black
  • HANS Clips silver HANS Clips silver
  • Pinlock® lens Pinlock® lens
  • National flags National flags
  • Tear-offs Tear-offs
Schuberth Logo Schuberth Logo

Your personal SF2 PRO

Each SF2 will be manufactured by hand according to individual specifications. If you would like to own such a first-class helmet, please contact our automobile racing team at: carracing(at)schuberth.com.

Scope of supply:

  • clear standard visor (non-tinted) 
  • 50% tinted visor (medium) 
  • 80% tinted visor (dark) 
  • tear-offs 
  • helmet bag
Schuberth Logo Schuberth Logo
Schuberth Logo

mini replicas - designs in 1:2

SCHUBERTH
MINI

Buy now
Schuberth Logo